|Model||Volume||Length / Width||Weight +/- 6%||Fin Type||Box Type||Fins||Sail Range|
|PERFORMA PRO 105||105||237x71||7.2||singlefin||powerbox||MFC Liquid Pro G-10 40||5.0/8.0|
|PERFORMA PRO 115||115||237x76||7.5||singlefin||powerbox||MFC Liquid Pro G-10 44||5.5/8.5|
|PERFORMA PRO 130||130||237x82||7.9||singlefin||powerbox||MFC Liquid Pro G-10 46||6.0/9.0|
|PERFORMA PRO 145||145||239x87||8.6||singlefin||powerbox||MFC Liquid Pro G-10 48||6.5/10.0|
- The revolutionary all-new ’HydroPlane’ bottom shape concept: The nose starts flat with no vee to sit the board square in the water maximising the planing surface at low speeds, which quickly transitions into a significant vee planform with a very deep double concave under the mast track area. This helps hydrodynamically channel the water towards the tail of the board before planing and aerodynamically channels the air
ofthe board after planing. Towards the tail the strong vee quickly transitions into an inverted vee shape between the feet, this keeps the outside rail line in the ‘water power zone’ straighter than a normal vee board, which we found drastically increases the control and side-to-side stability at speed. Feelingis believing!
- ‘UltraTuck’ all-new rail design concept: During the development process the more tuck we tested the better the boards performed, in particular with incredibly easy gybing and overall comfort especially in choppy conditions. So the final designs incorporated almost as much bottom rail tuck as the 5-axis machine would comfortably shape. Whilst the top rail shape is a gentle sloping dome that is very comfortable to step anywhere on the upper deck whether during
planingor non-planing conditions.
- ‘Freeride Vector Cuts
’ :Tail cutouts are here to stay in all future windsurfing flatwater board designs regardless of category. The overall performance gain is unmistakable not only with basic points like less spinouts,but they help initiate the required release around the fin to get planing earlier and accelerate effortlessly. Once planing the cutouts significantly reduce the amount of back leg pressure that always increases with speed, resulting in a much easier ride that leads to additional sailing hours on the water.
- For 2018 the Performa tail cutouts have the ideal blend
betweenhaving enough release,but at the same time enough grip/torque and low-end power. This is achieved from having the largest ‘fin plate’ area next to the fin in our flatwater range, whilst the inside cutouts end parallel to the middle of the fin box, thus leaving the correct amount of planing surface for a freeride board in front of the leading edge of the fin.
- High-precision 5-axis CAD/CAM CNC shape
- Full T700
biaxcarbon lightweight deck lamination layup for max. compression strength, performance and structural stability
- 100 kg/m3 PVC full bottom and 80 kg/m3 deck sandwich for maximum durability and compression strength resistance.
- Double PVC sandwich under the heels and gybe area for sustained durability and strength
- Additional high-strength reinforcements in all foot heel and high load areas (mast track, fin box,
- Ding resistant glass 160 gsm bottom layup
- Full UD unidirectional carbon bottom layup for maximum stiffness and performance
- MFC G10 Liquid Pro freeride fin